loading
CROWN-RH
CROWN
1.Structure: The structure of the helmet includes a shell, a buffer
layer, a comfortable liner, a wearing device, goggles, etc.
2.Comfort padding:
Using durable materials that are comfortable, breathable, non-toxic and harmless to the skin.
3.Goggles:
1) Impact strength: The goggles should not break or the edges of the broken pieces should not have sharp angles less than 60°
2)Visible light transmittance: not less than 85%
3) Abrasion resistance: After the falling sand test, the goggles should not have any damage, dents, or other damage that may affect their use.
4.Absorbing collision energy:
1) Peak acceleration ≤ 300 g;
2) Acceleration exceeding 150 g for ≤ 4 ms;
3) After the test, no obvious fragments fall off the shell
1.Structure: The structure of the helmet includes a shell, a buffer
layer, a comfortable liner, a wearing device, goggles, etc.
2.Comfort padding:
Using durable materials that are comfortable, breathable, non-toxic and harmless to the skin.
3.Goggles:
1) Impact strength: The goggles should not break or the edges of the broken pieces should not have sharp angles less than 60°
2)Visible light transmittance: not less than 85%
3) Abrasion resistance: After the falling sand test, the goggles should not have any damage, dents, or other damage that may affect their use.
4.Absorbing collision energy:
1) Peak acceleration ≤ 300 g;
2) Acceleration exceeding 150 g for ≤ 4 ms;
3) After the test, no obvious fragments fall off the shell